How to wax surf board

Whether you’re a beginner or an experienced surfer, waxing your board is an essential part of the process to ensure you get the most out of your surfing experience. Not only does it provide the necessary traction between your feet and the board, but it also helps protect your board from dirt and grime. But if you’ve never waxed a surfboard before, don’t worry! In this blog post, we will guide you through the entire process step-by-step so that you can confidently tackle waxing your surfboard like a pro. From what kind of wax to use to how often to re-wax and more, read on to learn all there is to know about waxing a surfboard!

What You’ll Need

Assuming you don’t have a wax remover on hand, you’ll need the following items to remove the wax from your surfboard:

-A steam iron
-A clean, lint-free cloth
-Wax remover or rubbing alcohol

If you have a wax remover, follow the instructions on the packaging. If you’re using rubbing alcohol, wet the cloth with it and wipe down the board in small sections. Be sure to go with the grain of the wax. Apply heat to the cloth with the iron as necessary.


Surface Preparation

Before you can apply wax to your surfboard, the surface must be clean and free of any dirt, grime, or old wax. The best way to do this is to give your board a good scrub with some warm water and a mild soap. Once you’ve scrubbed the entire surface, rinse it off with clean water and let it air dry.

Once your surfboard is clean and dry, it’s time to start prepping the surface for waxing. The first step is to sand the entire board with fine-grit sandpaper. This will help create a smooth surface for the wax to adhere to. Once you’ve sanded the entire board, wipe it down with a clean cloth to remove any dust particles.

Now that the surface is prepped, you’re ready to start waxing your surfboard!

Applying the Wax

Before applying the wax, make sure the surface of the board is clean and free of any dirt or debris. If the board is new, you will also need to sand it down to create a smooth surface for the wax to adhere to.

To apply the wax, start in one corner of the board and work your way in small circular motions across the entire surface. Once the wax is evenly applied, use a hairdryer to heat it up and help it set into the board.

Finishing Up

Assuming you have already prepped your surfboard and applied wax to it, there are only a few more steps left before you’re ready to hit the waves. First, use aPut the board on its tail and hold it with one hand in the middle of the board. Use your other hand to rub the wax in small circles across the entire surface of the board. Once you’ve gone over the entire board, use your palm to smooth out any wax bumps.

Next, turn the board over and do the same thing on the other side. Once both sides are done, take a clean towel and wipe off any excess wax. You don’t want too much wax on your board, as it will make it slippery and hard to control.

And that’s it! Your surfboard is now ready for action. Get out there and enjoy the waves!

Tips and Tricks

-To get the perfect wax job on your surfboard, start by heating up the wax. This will make it easier to spread.
-Next, use a putty knife or an old credit card to evenly spread the wax on your board. Make sure to go all the way to the edges.
-Once the entire board is covered, let the wax cool and harden for a few minutes.
-Finally, use a clean cloth or paper towel to buff out the wax and give your board a nice shine.

Scrub the deck

Before waxing your surfboard, you need to scrub the deck. This will remove any dirt or debris that may be on the surface of the board. To do this, you will need a soft brush and some water.

Start by wetting the brush and then gently scrubbing the surface of the board. Be sure to avoid any sharp objects that could scratch the surface of the board. Once you have scrubbed the entire surface, rinse it off with clean water.

After the deck is clean, you are ready to wax your surfboard.

Use a semi-thick, coarse foam block.

When waxing your surfboard, it’s important to use a semi-thick, coarse foam block. This will help to evenly distribute the wax on your board and avoid any buildup in one area. Be sure to apply pressure when using the block to ensure that the wax is being spread evenly.
For optimal results, it’s best to use a brand-new foam block. A well-used block may not pick up enough wax and could cause the wax to be unevenly applied.

Afterward, apply liquid wax.

After you have applied the liquid wax to your surfboard, you will need to let it dry. Once it is dry, you can then buff it out with a clean cloth. This will help to remove any excess wax and will also give your surfboard a nice shine.
Remember to always use a clean cloth when buffing your surfboard, as using the same cloth repeatedly can cause scratches on the surface.

Don’t use too much wax and don’t let it dry too quickly.

There are a few things to keep in mind when waxing your surfboard – don’t use too much wax and don’t let it dry too quickly. Too much wax will make it difficult to maneuver your board and can cause the wax to come off in the water. If the wax dries too quickly, it will be difficult to remove and will leave behind a sticky residue.

Wax a board before you go surfing.

Waxing your surfboard is an important part of the pre-surf ritual. It not only makes your board look good, but also protects it from the elements and keeps it performing at its best. There are a few different ways to wax a surfboard, but the most important thing is to use the right kind of wax for the conditions you’ll be surfing in. Here’s a quick guide to help you get started:

– Choose the right wax. If you’re surfing in warm water, you’ll need a tropical or all-temp wax. If you’re surfing in cold water, you’ll need a cold water or basecoat wax.

– Apply the wax to your board. You can do this with your hands or with a wax comb. Start at the nose of the board and work your way down to the tail.

– Rub the wax into the board. Use circular motions to really work the wax into the pores of the surfboard.

– Let the wax dry. Once it’s dry, you’re ready to hit the waves!


Apply wax to only the bottom part of the deck to prevent leaving streaks on the top.

When waxing your surfboard, be sure to apply the wax only to the bottom part of the deck. This will prevent leaving streaks on the top of the board. To apply the wax, use a circular motion and cover the entire bottom surface of the board. Once you’ve applied a thin layer of wax, use a clean cloth to buff it out until it’s shiny.

Be safe when polishing boards and then surf them safely.

When polishing your board, always use a clean cloth and a gentle circular motion. Wax can build up over time and make the surface of your board slippery, so be sure to remove all wax before surfing. When surfing, be sure to stay aware of other surfers and avoid crowded areas. Also, be sure to check the conditions of the waves before entering the water.


Waxing your surfboard is essential for protecting it and ensuring that you get the best possible performance out of your board. By following the waxing steps we have outlined in this article, you can ensure that your board stays in great condition and provides you with plenty of fun time out on the waves! Plus, with a little bit of practice, waxing can even become an enjoyable part of pre-surf preparation – so don’t be afraid to give it a go.


Leave a Reply

Your email address will not be published.